Shackles
A shackle is a curved piece of metal secured with a pin or bolt across the opening. Shackles are used as a link in rigging systems that are used in boats, ships and industrial cranes.
Cable Craft re-sells approved shackles to Toronto clients.
We carry four types of shackles: Screw pin, Bolt anchor, Screw pin chain and Bolt chain.
As a Toronto shackle distributor, we carry all four types of shackles in various sizes and working load limits.
SHACKLES
SCREWPIN G-209
BOLT ANCHOR G-2130
SCREWPIN CHAIN G-210
BOLT CHAIN G-2150
SHACKLE SIZE INCHES WORKING LOAD LIMIT TONS DIMENSION A DIMENSION B 3/16 1/3 .38 .28 1/4 1/2 .47 .31 5/16 3/4 .53 .38 3/8 1 .66 .44 7/16 1-1/2 .75 .50 1/2 2 .81 .63 5/8 3-1/4 1.06 .75 3/4 4-3/4 1.25 .88 7/8 6-1/2 1.44 1.00 1 8-1/2 1.69 1.13 1-1/8 9-1/2 1.81 1.25 1-1/4 12 2.03 1.38 1-3/8 13-1/2 2.25 1.5 1-1/2 17 2.38 1.63 1-3/4 25 2.88 2.00 2 35 3.25 2.25 2-1/2 55 4.13 2.75 3 85 5.00 3.25 3-1/2 120 5.25 3.75 4 150 5.50 4.25
Wire Rope Clips
A wire rope clip is used to fix the loose end of the loop back to the wire rope.
The clip itself consists of a curved shaped bolt, a saddle and two nuts. The two layers of wire rope are placed in the curved shaped bolt, followed by placing the saddle and fitting the ropes onto the bolt.
Cable Craft sells the wire rope clip and the fist grip clip in Toronto to clients. Our company has a large selection of wire rope clips in various sizes (both in the clips and for the size of rope) and rope holding limits.
WIRE ROPE CLIP DROP FORGED
Clip Size(inches) Rope Size(inches) Minimum No. of Clips Amount of Rope to Turn Back in Inches Torque in Ft. Lbs. 1/8 1/8 2 3-1/4 4.5 3/16 3/16 2 3-1/4 7.5 1/4 1/4 2 4-1/4 15 5/16 5/16 2 5-1/4 30 3/8 3/8 2 6-1/2 45 7/16 7/16 2 7 65 1/2 1/2 3 11-1/2 65 9/16 9/16 3 12 95 5/8 5/8 3 12 95 3/4 3/4 4 18 130 7/8 7/8 4 19 225 1 1 5 26 225 1-1/8 1-1/8 6 34 225 1-1/4 1-1/4 7 44 360 1-3/8 1-3/8 7 44 360 1-1/2 1-1/2 8 54 360 1-5/8 1-5/8 8 58 430 1-3/4 1-3/4 8 61 590 2 2 8 71 750 2-1/4 2-1/4 8 73 750 2-1/2 2-1/2 9 84 750 2-3/4 2-3/4 10 100 750 3 3 10 106 1200 3-1/2 3-1/2 12 149 1200
FIST GRIP CLIP
Clip Size(inches) Rope Size(inches) Minimum No. of Clips Amount of Rope to Turn Back in Inches Torque in Ft. Lbs. 3/16 3/16 2 4 30 1/4 1/4 2 4 30 5/16 5/16 2 5 30 3/8 3/8 2 5-1/4 45 7/16 7/16 2 6-1/2 65 1/2 1/2 3 11 65 9/16 9/16 3 12-3/4 130 5/8 5/8 3 13-1/2 130 3/4 3/4 3 16 225 7/8 7/8 4 26 225 1 1 5 37 225 1-1/8 1-1/8 5 41 360 1-1/4 1-1/4 6 55 360 1-3/8 1-3/8 6 62 500 1-1/2 1-1/2 7 78 500
STEP 1: Apply first clip one base width from dead end of the rope. Put u bolt over dead end. Live end rests in clip saddle. Tighten nuts evenly to recommended torque.
STEP 2: Apply 2nd clip as close to loop as possible. Put U bolt over dead end turn nuts firmly but do not tighten.
STEP 3: All other clips space evenly between first two. Apply tension and tighten all nuts to recommended torque.
RE-CHECK NUT TORQUE AFTER ROPE HAS BEEN IN OPERATION.
Eye & Swivel Sling Hooks
Cable Craft offers six options for eye and swivel sling hooks in Toronto to clients.
Eye sling hooks and swivel hooks are used to help lift and move materials.
As a Toronto eye and swivel sling hook distributor, we offer:
- * Carbon Swivel Hook
- * Alloy Swivel Hook
- * Carbon Hook
- * Carbon Shank Hook
- * Alloy Shank Hook
- * Alloy Eye Hook
WIRE ROPE SLING HOOKS
CARBON SWIVEL HOOK
CARBON
3/4 TON
1 TON
1-1/2 TON
2 TON
3 TON
5 TON
7-1/2 TON
10 TON
15 TON
ALLOY SWIVEL HOOK
ALLOY
1 TON
1-1/2 TON
2 TON
3 TON
5 TON
7 TON
11 TON
15 TON
22 TON
30 TON
CARBON
CARBON SHANK
CARBON
3/4 TON
1 TON
1-1/2 TON
2 TON
3 TON
5 TON
7-1/2 TON
10 TON
15 TON
20 TON
25 TON
30 TON
40 TON
ALLOY SHANK
ALLOY EYE HOOK
ALLOY
1 TON
1-1/2 TON
2 TON
3 TON
5 TON
7 TON
11 TON
15 TON
22 TON
30 TON
37 TON
45 TON
60 TON
Self Locking Hooks
A self locking hook is used to help support a heavy load during construction.
The hook is a curved hook which has an opening to help support and connect for load bearing activities. These heavy duty lifting hooks also has a self-locking feature which allows the hook to be used at almost any horizontal angle or slope.
SHACKLES
SCREWPIN G-209
BOLT ANCHOR G-2130
SCREWPIN CHAIN G-210
BOLT CHAIN G-2150
SHACKLE SIZE INCHES WORKING LOAD LIMIT TONS DIMENSION A DIMENSION B 3/16 1/3 .38 .28 1/4 1/2 .47 .31 5/16 3/4 .53 .38 3/8 1 .66 .44 7/16 1-1/2 .75 .50 1/2 2 .81 .63 5/8 3-1/4 1.06 .75 3/4 4-3/4 1.25 .88 7/8 6-1/2 1.44 1.00 1 8-1/2 1.69 1.13 1-1/8 9-1/2 1.81 1.25 1-1/4 12 2.03 1.38 1-3/8 13-1/2 2.25 1.5 1-1/2 17 2.38 1.63 1-3/4 25 2.88 2.00 2 35 3.25 2.25 2-1/2 55 4.13 2.75 3 85 5.00 3.25 3-1/2 120 5.25 3.75 4 150 5.50 4.25
Eye Bolts
An eye blot is a screw which has a loop on one end and threads on the opposite end. These bolts are primarily used to attach cables to objects.
Cable Craft sells three types of eye bolts in Toronto, with a large selection of sizes to cater to their clients’ needs.
As a Toronto eye bolt distributor, we offer:
* Regular Nut Eye Bolt
* Shoulder Machinery Eye Bolt
* Shoulder Nut Eye Bolt
FORGED EYE BOLT
REGULAR NUT EYE BOLT
Shank Dia. & Length(in.)
Working Load Limit * (Lbs.)
Dimensions(in.)
A
B
C
1/4 x 2
650
.25
.50
1.50
1/4 x 4
650
.25
.50
2.50
5/16 x 2-1/4
1200
.31
.62
1.50
5/16 x 4-1/4
1200
.31
.62
2.50
3/8 x 2-1/2
1550
.38
.75
1.50
3/8 x 4-1/2
1550
.38
.75
2.50
3/8 x 6
155
.38
.75
2.50
1/2 x 3-1/4
2600
.50
1.00
1.50
1/2 x 6
2600
.50
1.00
3.00
1/2 x 8
2600
.50
1.00
3.00
1/2 x 10
2600
.50
1.00
3.00
1/2 x 12
2600
.50
1.00
3.00
5/8 x 4
3500
.62
1.25
2.00
5/8 x 6
3500
.62
1.25
3.00
5/8 x 8
3500
.62
1.25
3.00
5/8 x 10
3500
.62
1.25
3.00
5/8 x 12
3500
.62
1.25
4.00
3/4 x 4-1/2
5200
.75
1.50
2.00
3/4 x 6
5200
.75
1.50
3.00
3/4 x 8
5200
.75
1.50
3.00
3/4 x 10
5200
.75
1.50
3.00
3/4 x 12
5200
.75
1.50
4.00
3/4 x 15
5200
.75
1.50
5.00
7/8 x 5
10600
.88
1.75
2.50
7/8 x 8
10600
.88
1.75
4.00
7/8 x 12
10600
.88
1.75
4.00
1 x 6
13300
1.00
2.00
3.00
1 x 9
13300
1.00
2.00
4.00
1 x 12
13300
1.00
2.00
4.00
1 x 18
13300
1.00
2.00
7.00
1-1/4 x 8
21000
1.25
2.50
4.00
1-1/4 x 12
21000
1.25
2.50
4.00
1-1/4 x 20
21000
1.25
2.50
6.00
NOTE: Recommended for straight line pull.
SHOULDER MACHINERY EYE BOLT
Diameter & Length(in.)
Working Load Limit * (Lbs.)
Dimensions(in.)
A
B
C
1/4 x 1
650
1/4 – 20
1.02
2.29
5/16 X 1-1/8
1200
5/16 – 18
1.15
2.74
3/8 x 1-1/4
1550
3/8 – 16
1.27
3.07
1/2 x 1-1/2
2600
1/2 – 13
1.53
3.70
5/8 x 1-3/4
4000
5/8 – 11
1.79
4.45
3/4 x 2
5000
3/4 – 10
2.05
5.07
7/8 x 2-1/4
10600
7/8 – 9
2.31
5.87
1 x 2-1/2
13300
1 – 8
2.57
6.66
1-1/4 x 3
21000
1 1/4 – 7
3.09
7.95
1-1/2 x 3-1/2
24000
1 1/2 – 6
3.60
9.49
SHOULDER NUT EYE BOLT
| Diameter & Length(in.) | Working Load Limit * | Dimensions(in.) | ||
|---|---|---|---|---|
| A | B | C | ||
| 1/4 x 2 | 650 | .25 | .50 | 1.50 |
| 1/4 x 4 | 650 | .25 | .50 | 2.50 |
| 5/16 x 2-1/4 | 1200 | .31 | .62 | 1.50 |
| 5/16 x 4-1/4 | 1200 | .31 | .62 | 2.50 |
| 3/8 x 2-1/2 | 1550 | .38 | .75 | 1.50 |
| 3/8 x 4-1/2 | 1550 | .38 | .75 | 2.50 |
| 1/2 x 3-1/4 | 2600 | .50 | 1.00 | 1.50 |
| 1/2 x 6 | 2600 | .50 | 1.00 | 3.00 |
| 5/8 x 4 | 3500 | .62 | 1.25 | 2.00 |
| 5/8 x 6 | 3500 | .62 | 1.25 | 3.00 |
| 3/4 x 4-1/2 | 5200 | .75 | 1.50 | 2.00 |
| 3/4 x 6 | 5200 | .75 | 1.50 | 3.00 |
| 7/8 x 5 | 10600 | .88 | 1.75 | 2.50 |
| 1 x 6 | 13300 | 1.00 | 2.00 | 3.00 |
| 1 x 9 | 13300 | 1.00 | 2.00 | 4.00 |
| 1-1/4 x 8 | 21000 | 1.25 | 2.50 | 4.00 |
| 1-1/4 x 12 | 21000 | 1.25 | 2.50 | 4.00 |
| 1-1/2 x 15 | 24000 | 1.50 | 3.00 | 6.00 |
NOTE: Recommended for straight line pull.
Swivel Hoist Ring
A swivel hoist ring is an eyebolt that is used to connect to webbing, chains or shackles. It designed to be rigged from the center or the side and may swivel in action.
As a Toronto swivel hoist ring distributor, Cable Craft sells two types of swivel hoist rings: standard swivel hoist ring and metric swivel hoist ring.
Cable Craft sells the standard swivel hoist ring and the metric swivel hoist ring in multiple sizes and weight options in their Toronto facility. This gives our clients many options when purchasing a swivel hoist ring.
STANDARD SWIVEL HOIST RING
Material : 4140 Aircraft quality
Finish : Black oxide per mil spec
Safety factor :5:1
100% Magnetic particle inspection
Certified heat treatment
Rated Loades (Lbs)
Thread Size
A
C
D
E
Standard U-Bar
Long U-Bar
G
H
Torque Ft/#
Wt. (Lbs)
Part No.
B
F
Part No.
B
F
600
1/4-20
0.43
0.71
3/8
0.54
46100
1.27
2.67
1.84
1.00
6
0.3
800
5/16-18
0.43
0.71
3/8
0.29
46102
1.27
2.67
1.84
1.00
7
0.3
800
5/16-18
0.43
0.71
3/8
0.54
46104
1.27
2.67
1.84
1.00
7
0.3
1,000
3/8-16
0.43
0.71
3/8
0.54
46106
1.27
2.67
1.84
1.00
12
0.3
2,000
7/16-14
0.70
0.93
1/2
1.07
46606
1.9
3.77
2.58
1.49
22
1.0
2,500
1/2-13
0.70
0.93
1/2
1.07
46602
184
3.77
2.58
1.49
28
1.0
2,000
7/16-14
0.88
1.22
3/4
0.78
46000
2.37
4.78
46638
4.34
6.72
3.52
1.99
22
2.6
2,500
1/2-13
0.88
1.22
3/4
0.78
46008
2.31
4.78
46644
4.25
6.72
3.52
1.99
28
2.6
2,500
1/2-13
0.88
1.22
3/4
1.03
46010
2.31
4.78
46646
4.25
6.72
3.52
1.99
28
2.6
2,500
1/2-13
0.88
1.22
3/4
1.28
46012
2.31
4.78
46648
4.25
6.72
3.52
1.99
28
2.6
2,500
9/16-12
0.88
1.22
3/4
0.78
46007
2.25
4.78
46651
4.19
6.72
3.52
1.99
30
2.6
4,000
5/8-11
0.88
1.22
3/4
0.78
46002
2.18
4.78
46641
4.12
6.72
3.52
1.99
60
2.6
4,000
5/8-11
0.88
1.22
3/4
1.03
46004
2.18
4.78
46640
4.12
6.72
3.52
1.99
60
2.6
4,000
5/8-11
0.88
1.22
3/4
1.28
46006
2.18
4.78
46642
4.12
6.72
3.52
1.99
60
2.6
4,000
5/8-11
0.88
1.22
3/4
1.53
46005
2.18
4.78
46643
4.12
6.72
3.52
1.99
60
2.6
5,000
3/4-10
0.88
1.22
3/4
1.03
46014
2.06
4.78
46650
4.00
6.72
3.52
1.99
100
3.0
5,000
3/4-10
0.88
1.22
3/4
1.53
46018
2.06
4.78
46654
4.00
6.72
3.52
1.99
100
3.0
7,000
3/4-10
1.40
1.71
1
1.04
46204
3.06
6.52
46658
4.65
8.11
5.14
3.00
100
7.0
7,000
3/4-10
1.40
1.71
1
1.54
46206
3.06
6.52
46660
4.65
8.11
5.14
3.00
100
7.0
8,000
7/8-9
1.40
1.71
1
1.04
46202
2.93
6.52
46656
4.52
8.11
5.14
3.00
160
7.0
8,000
7/8-9
1.40
1.71
1
1.29
46203
2.93
6.52
46657
4.52
8.11
5.14
3.00
160
7.0
8,000
7/8-9
1.40
1.71
1
1.54
46205
2.93
6.52
46655
4.52
8.11
5.14
3.00
160
7.0
10,000
1-8
1.40
1.71
1
1.29
46210
2.81
6.52
46662
4.40
8.11
5.14
3.00
230
7.5
10,000
1-8
1.40
1.71
1
1.54
46212
2.81
6.52
46664
4.40
8.11
5.14
3.00
230
7.5
10,000
1-8
1.40
1.71
1
2.29
46214
2.81
6.52
46666
4.40
8.11
5.14
3.00
230
7.5
10,000
1 1/8-7
1.40
1.71
1
2.29
46216
2.69
6.52
46668
4.28
8.11
5.14
3.00
230
7.5
10,000
1 1/8-8
1.40
1.71
1
2.29
46217
2.69
6.52
46669
4.28
8.11
5.14
3.00
230
7.5
15,000
1 1/4-7
1.75
2.11
1-1/4
1.89
46802
4.12
8.73
6.50
3.76
470
14.0
15,000
1 1/4-8
1.75
2.11
1-1/4
1.89
46805
4.12
8.73
6.50
3.76
470
14.0
15,000
1 3/8-6
1.75
2.11
1-1/4
1.89
46806
4.06
8.73
6.50
3.76
470
14.5
15,000
1 3/8-8
1.75
2.11
1-1/4
1.89
46807
4.06
8.73
6.50
3.76
470
14.5
20,000
1 3/8-6
2.00
2.40
1-1/2
2.5
46702
5.5
10.2
7.46
4.31
540
23.0
24,000
1 1/2-6
2.25
2.81
1-3/4
2.7
46404
6.41
12.47
8.55
4.87
800
34.0
24,000
1 1/2-8
2.25
2.81
1-3/4
2.7
46405
6.41
12.47
8.55
4.87
800
34.0
24,000
1 3/4-5
2.25
2.81
1-3/4
2.7
46408
6.16
12.47
8.55
4.87
800
34.0
24,000
1 3/4-8
2.25
2.81
1-3/4
3.2
46406
6.16
12.47
8.55
4.87
800
34.0
30,000
2-4 1/2
2.25
2.81
1-3/4
2.96
46400
5.91
12.47
8.55
4.87
800
36.0
30,000
2-8
2.25
2.81
1-3/4
2.96
46440
5.91
12.47
8.55
4.87
800
36.0
30,000
2 1/4-4 1/2
2.25
2.81
1-3/4
3.2
46431
5.66
12.47
8.55
4.87
800
40.0
30,000
2 1/4-8
2.25
2.81
1-3/4
3.2
46435
5.66
12.47
8.55
4.87
800
40.0
50,000
2 1/2-8
3.00
4.09
2-1/4
4.00
47002
8.03
16.87
11.67
6.52
2100
88.0
50,000
2 1/2-4
3.00
4.09
2-1/4
4.00
47006
8.03
16.87
11.67
6.52
2100
88.0
50,000
2 3/4-4
3.00
4.09
2-1/4
4.00
47008
7.75
16.87
11.67
6.52
2100
90.0
50,000
2 3/4-8
3.00
4.09
2-1/4
4.00
47010
7.75
16.87
11.67
6.52
2100
90.0
75,000
3-4
3.75
5.27
2-3/4
5.00
47200
8.48
19.50
14.15
8.10
4300
166.0
75,000
3-8
3.75
5.27
2-3/4
5.00
47202
8.48
19.50
14.15
8.10
4300
166.0
100,000
3 1/2-4
4.00
6.06
3-1/4
7.00
47402
9.28
22.09
15.90
8.60
5100
265.0
100,000
3 1/2-8
4.00
6.06
3-1/4
7.00
47406
9.28
22.09
15.90
8.60
5100
265.0
250,000
6-4
6.00
14.00
5
9.00
47602
14.00
33.00
25.00
13.00
9900
790.0
METRIC SWIVEL HOIST RING
Material : 4140 Aircraft quality
Finish : Black oxide per mil spec
Safety factor :5:1
100% Magnetic particle inspection
Certified heat treatment
Rated Loades (Lbs)
Thread Size
A
C
D
E
Standard U-Bar
Long U-Bar
G
H
Torque Ft/#
Wt. (Lbs)
Part No.
B
F
Part No.
B
F
400
M8x1.25
11
18
10
13
46912
32
68
47
25
9
0.4
400
M8x1.25
11
18
10
18
46913
32
68
47
25
9
0.4
500
M10x1.50
11
18
10
18
46916
30
68
47
25
16
0.4
1,050
M12x1.75
18
24
13
27
46608
48
96
66
38
37
1.0
1,050
M16x2.00
18
24
13
27
46609
45
96
66
38
80
1.0
1,050
M12x1.75
22
30
19
19
46924
60
121
47124
110
171
89
51
37
2.5
1,050
M14x2.00
22
30
19
29
46928
58
121
47128
108
171
89
51
40
2.5
1,900
M16x2.00
22
30
19
24
46933
56
121
47126
106
171
89
51
80
2.5
1,900
M16x2.00
22
30
19
29
46930
56
121
47130
106
171
89
51
80
2.5
1,900
M18x2.50
22
30
19
29
46934
54
121
47134
104
171
89
51
90
2.5
2,150
M20x2.50
22
30
19
29
46938
52
121
47132
102
171
89
51
135
2.7
2,150
M20x2.50
22
30
19
34
46936
52
121
47136
102
171
89
51
135
2.7
3,000
M20x2.50
36
43
25
27
46941
78
166
47140
118
206
131
76
135
6.7
3,000
M20x2.50
36
43
25
32
46942
78
166
47142
118
206
131
76
135
6.7
3,000
M22x2.50
36
43
25
37
46944
76
166
47144
116
206
131
76
135
7.0
4,200
M24x3.00
36
43
25
32
46947
74
166
47146
114
206
131
76
311
7.0
4,200
M24x3.00
36
43
25
37
46948
74
166
47148
114
206
131
76
311
7.0
4,200
M30x3.50
36
43
25
58
46950
108
206
131
76
637
7.0
7,000
M30x3.50
45
54
32
42
46956
106
222
165
95
637
15.0
7,000
M30x3.50
45
54
32
46
46955
106
222
165
95
637
15.0
7,000
M30x3.50
45
54
32
62
46958
106
222
165
95
637
15.0
7,000
M30x3.50
45
54
32
67
46957
106
222
165
95
637
15.0
7,000
M33x3.50
45
54
32
67
46960
103
222
165
95
637
15.0
10,000
M33x3.50
50
62
38
58
46961
140
259
189
109
637
23.0
10,000
M33x3.50
50
62
38
68
46962
140
259
189
109
637
23.0
11,000
M36x4.00
57
71
44
58
46963
166
317
217
124
1085
35.0
11,000
M36x4.00
57
71
44
63
46966
166
317
217
124
1085
35.0
11,000
M36x4.00
57
71
44
68
46964
166
317
217
124
1085
35.0
12,500
M42x4.50
57
71
44
68
46965
160
317
217
124
1085
36.0
12,500
M42x4.50
57
71
44
83
46968
160
317
217
124
1085
36.0
13,500
M48x5.00
57
71
44
68
46980
154
317
217
124
1085
38.0
13,500
M48x5.00
57
71
44
83
46970
154
317
217
124
1085
38.0
13,500
M48x5.00
57
71
44
88
46979
154
317
217
124
1085
38.0
13,500
M56x5.50
57
71
44
88
46973
154
317
217
124
1085
38.0
22,300
M64x6.00
76
103
57
101
46972
204
428
296
165
2847
86.0
31,500
M72x6.00
95
133
70
132
46988
220
495
359
206
5830
165.0
31,500
M80x6.00
95
133
70
132
46989
200
495
359
206
5830
165.0
44,600
M90x6.00
102
153
83
177
46990
235
561
404
218
6914
260.0
44,600
M100x6.00
102
153
83
200
46994
235
561
404
218
6914
280.0
Plate & Beam Clamp
Plate Clamps are used to lift sheets, plates and large pieces of metal.
Beam Clamps are used to secure secondary steel work and building services equipment such as cable trays and pipe work.
As a Toronto plate and beam clamp distributor, Cable Craft sells three types of clamps: vertical, vertical swivel and beam clamps.
These three types of clamps are offered in various sizes and lifting capacities in our Toronto facility.
Snatch Block
A snatch block is a pulley made of heavy material in order to lift and handle several thousands of pounds. Even though it can lift huge objects, the snatch block is only a few pounds itself and is quire compact in size.
As a Toronto snatch block distributor, Cable Craft carries three types of snatch blocks.
We offer the following three snatch blocks:
* Snatch Block with a hook
* Snatch Block with a shackle
* Snatch Block with a tail board
SNATCH BLOCKS
WITH HOOK
WITH SHACKLE
TAIL BOARD
Sheave Diameter in.
Wire Rope in.
Working Load Limit tons
Weight Each Lbs.
With Hook
With Shackle
Tail Board
3″
5/16″ – 3/8″
2
4.5
4
2.7
4-1/2″
3/8″ – 1/2″
4
11.7
12
6.6
6″
5/8″ – 3/4″
8
26.9
27.8
15
8″
5/8″ – 3/4″
8
33
34
21
8″
1″ – 1/8″
15
58
65
35
8″
1″ – 1/8″
20
102
117
70
10″
5/8″ – 3/4″
8
41
42
29
12″
5/8″
8
48
49
36
12″
3/4″
8
48
49
36
14″
5/8″
8
55
56
—
14″
3/4″
8
55
56
—
16″
3/4″
15
130
135
—
16″
7/8″
15
130
135
—
18″
7/8″
15
150
155
—
18″
1″
15
150
155
—
Turnbuckles
A turnbuckle is a tool that is used to adjust tension or length of ropes, cables, tie rods and other tensioning systems.
The turnbuckle itself consists of two threaded eyelets that are screwed into each end of the tool.
As a Toronto turnbuckle distributor, Cable Craft has five types of turnbuckles in stock:
* Jaw & Jaw
* Eye & Jaw
* Eye & Eye
* Hook & Hook
* Hook & Eye
In order to give our Toronto customers various options, the turnbuckles come in several sizes and work load limits.
TURNBUCKELS
JAW & JAW
EYE & JAW
EYE & EYE
Thread Diameter & Take Up(in.) Working Load Limit(Lbs.) Weight Each(Lbs.) 1/4 x 4 500 0.26 5/16 x 4-1/2 800 .45 3/8 x 6 1200 0.76 1/2 x 6 2200 1.54 1/2 x 9 2200 1.13 1/2 x 12 2200 2.14 5/8 x 6 3500 3.28 5/8 x 9 3500 2.83 5/8 x 12 3500 3.42 3/4 x 6 5200 3.79 3/4 x 9 5200 4.61 3/4 x 12 5200 5.48 3/4 x 18 5200 7.19 7/8 x 12 7200 7.22 7/8 x 18 7200 9.95 1 x 6 10000 9.04 1 x 12 10000 11.5 1 x 18 10000 14 1 x 24 10000 17.25 1-1/4 x 12 15200 19 1-1/4 x 18 15200 23 1-1/4 x 24 15200 27 1-1/2 x 12 21400 27.5 1-1/2 x 18 21400 31 1-1/2 x 24 21400 37.5 1-3/4 x 18 28000 52.5 1-3/4 x 24 28000 58 2 x 24 37000 85.25 2-1/2 x 24 60000 144.25 2-3/4 x 24 75000 194
HOOK & HOOK
HOOK & EYE
Thread Diameter & Take Up(in.) Working Load Limit(Lbs.) Weight Each(Lbs.) 1/4 x 4 400 0.29 5/16 x 4-1/2 700 .49 3/8 x 6 1000 0.78 1/2 x 6 1500 1.61 1/2 x 9 1500 1.85 1/2 x 12 1500 2.26 5/8 x 6 2250 2.70 5/8 x 9 2250 3.13 5/8 x 12 2250 3.78 3/4 x 6 3000 3.89 3/4 x 9 3000 4.61 3/4 x 12 3000 5.83 3/4 x 18 3000 6.33 7/8 x 12 4000 8.10 7/8 x 18 4000 9.95 1 x 6 5000 9.33 1 x 12 5000 11.93 1 x 18 5000 14 1 x 24 5000 17.25 1-1/4 x 12 6500 19 1-1/4 x 18 6500 23 1-1/4 x 24 6500 24 1-1/2 x 12 7500 27.5 1-1/2 x 18 7500 31 1-1/2 x 24 7500 37.5
Weld On Hooks
A weld on hook is a hook that is meant to be attached to mobile lifting equipment to provide assistance for simple sling attachment.
As a Toronto weld on hook distributor, Cable Craft carries alloy weld on hooks and WLP weld-on lifting point hooks.
These two hooks come in various sizes and working load limits.
WELDING HOOKS & RINGS
Alloy Specialty Products
ALLOY WELD-ON HOOKS
Model
Working Load Limit * (Tons.)
Domensions (Inches.)
Weight Each (Lbs.)
B
C
G
H
K
L
S
a
UKN-0.75**
0.75
.79
2.2
.51
.79
.75
3.2
.20
.12
.6
UKN-1**
1.0
.83
2.8
.67
.99
.99
3.7
.24
.16
1.2
UKN-2**
2.0
4.5
1.0
.79
3.4
1.2
.20
1.2
.32
2.2
UKN-3
3.0
1.1
4.1
.91
1.2
1.4
5.2
.39
.24
2.2
UKN-4
4.0
1.1
4.4
1.1
1.5
1.7
5.5
.43
.28
4.2
UKN-5
5.0
1.3
5.1
1.2
1.8
1.8
1.5
.47
.32
6.5
UKN-8
8.0
1.3
5.2
1.5
2.0
2.0
6.8
.51
.35
8.2
UKN-10
10.0
1.9
6.6
1.7
2.3
2.2
8.7
.55
.35
11.0
SHB-14
14.0
2.0
8.8
1.7
2.4
2.4
8.3
.79
.31
19.0
*Design Factor 5:1 Proof tested & certified
**Welding plate on UKN-0.75, UKN-2, and UKN-1 is slightly curved.
Baseplate SHB-14 is 1024C steel (use electrode AWS/ASTM E7018-1, ISO E51 5 B120 20H). Welding is to be done by a qualified welder. Hook satch is alloy.
WLP WELD-ON LIFTING POINT
Model
Working Load Limit * (Lbs.)
Domensions (Inches.)
Weight Each (Lbs.) APX
B
D
G
H
L
R
T
WLP-1T
2,204
2.0
.55
1.1
1.5
2.2
.95
4.1
1.1
WLP-3T
6,612
2.3
.67
1.3
1.9
2.0
1.1
4.4
2.0
WLP-5T
11,020
2.5
.87
1.7
2.4
2.9
1.3
1.6
3.7
*Design Factor 4:1 Proof tested & certified. Welding instructions included.
Latch Kits
LATCH & TRIGGER KITS
TRIGGER KIT
MERTIC IMPERIAL 6,5-8 7/32″ 7,8-8 9/32,1/4,5/16″ 10-8 3/8″ 13-8 1/2″ 16-8 5/8″ 18,20-8 3/4″ 22-8 7/8″ 26-8 1″ 28-8 1-1/8″
NEW STYLE LATCH KIT
CARBON HOOK ALLOY HOOK 3/4 TON 1 TON 1 TON 1-1/2 TON 1-1/2 TON 2 TON 2 TON 3 TON 3 TON 5 TON 5 TON 7 TON 7-1/2 TON 11 TON 10 TON 15 TON 15 TON 22 TON
OLD STYLE LATCH KIT
CARBON HOOK ALLOY HOOK 3/4 TON 1 TON 1 TON 1-1/2 TON 1-1/2 & 2 TON 2 & 3 TON 3 TON 4-1/2 & 5 TON 5 TON 7 TON 7-1/2 & 10 TON 11 & 15 TON 15 TON 22 TON 20 TON 30 TON 25 & 30 TON 37 & 45 TON 40 TON 60 TON
WELD ON HOOK LATCH
1 TON 2 TON 3 TON 5 TON 8 TON 10 TON 15 TON
CHAIN SLING HOOK LATCHES
MERTIC IMPERIAL 6,5-8 7/32″ 7,8-8 9/32,1/4,5/16″ 10-8 3/8″ 13-8 1/2″ 16-8 5/8″ 18,20-8 3/4″ 22-8 7/8″
SLIDING CHOKER LATCH
3/8″ 1/2″ 5/8″ 3/4″ 7/8″ 1″
DRIVE & LOAD PIN
MERTIC IMPERIAL 6,5-8 7/32″ 7,8-8 9/32,1/4,5/16″ 10-8 3/8″ 13-8 1/2″ 16-8 5/8″ 18,20-8 3/4″ 22-8 7/8″ 26-8 1″
Cutters & Swagers
Cable Craft is a Toronto cutter and swager distributor.
A cutter is used to make clean cuts on cables. The jaw blades on the cutter itself are sharp and taper as they cut, eliminating chain cutters and chisels, taped and frayed ends.
A swager is used for also cutting wire ropes and crimping aluminum and cooper materials.
As a Toronto cutter and swager distributor, Cable Craft carries six types of cutters and six types of swaggers. These tools come in various sizes and are used for specific sizes of wires and cables.
HAND TOOLS
HAND SWAGERS
CABLE CUTTERS
Cable Craft Ltd.
| TEL: 416.749.8822 | TOLL FREE: 1.800.350.2083 | FAX: 416.749.9774 |
Email: [email protected]